The EPEVER Tracer AN Sequence Photo voltaic Charge Controller can be a highly effective solar controller made for off-grid photo voltaic devices. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) programs.
Crucial Characteristics on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technology for excellent photo voltaic Vitality harvesting. Important features include:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Innovative MPPT Algorithm with >99% performance.
Twin-Phase Charging for Improved battery life.
LCD Display with genuine-time information monitoring.
Numerous Load Manage Modes including manual and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Move Guideline to Creating the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are incorporated: Tracer AN device, temperature sensor, interaction cables, and person guide.
Verify the product amount and voltage ratings match your photo voltaic panel and battery specifications.
2. Mounting the Demand Controller
Find a very well-ventilated, dry locale close to the battery lender.
Protected the Tracer AN controller using the presented mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Constantly observe appropriate basic safety protocols and make sure the program is powered off in advance of connecting factors.
Phase 1: Connect the battery terminals into the cost controller (good to positive, destructive to adverse).
Stage 2: Hook up the solar panel array to the PV enter terminals.
Phase 3: Join the load terminals if employing a direct load connection.
Action 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Energy within the controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port visit here using program for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Difficulties
Situation one: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Protection
Validate the solar array’s voltage score.
Adjust process parameters if essential.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Efficiency: Lowered Power losses during conversion.
Improved Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Lifetime: Consistent and correct charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is definitely an Remarkable choice for optimizing solar energy technology and extending battery daily life. By following the above set up guideline, consumers can assure maximum efficiency and technique longevity.